Attention Sensor for the Home Heartbeat

Add comments

The following table identifies the values that are valid for each field of the state record. For a complete description of these values and their use, please see the State Table of The Eaton Home Heartbeat document.

Field Name Data

1 State Record ID A value from 2 (0x02) to 33 (0x21) is assigned to this device

2 ZigBee Binding ID A value from 0 (0x00) to 31 (0x1F) is assigned to this device

3 Device Capabilities Bit 2 (0x04) – Is a sensor
Bit 5 (0x20) – Is a sensor

4 Device Type 7 (0x0007) – Attention

5 Device State Bit 0 (0x01) – Requested
Bit 1 (0x02) – Standby

6 Device State Timer Values from 0 (0x00) to 59 (0x3B) represent 0 to 59 seconds
Values from 64 (0x40) to 123 (0x7B) represent 0 to 59 minutes
Values from 128 (0x80) to 151 (0x97) represent 0 to 23 hours
Values from 160 (0xA0) to 255 (0xFF) represent 0 to 95 days

7 Device Alerts Bit 0 (0x01) – Alarm triggered; controlled by Field 9: Device Configuration
Bit 1 (0x02) – Device off-line, out of range, or battery dead
Bit 2 (0x04) – Low Battery signal sent during “I’m Alive” message from device

Device Name Index

0
1
2
3
4
5
6
7
8
9
10
11
12
13

Attention Sensor
Be There Soon
Call Home
Call Me
Doorbell
Get Milk
I Love You
I Miss You
I’m Home
I’m Leaving
Need Help
Neighborhood Watch
Pick Up Dinner
Problem at Home

14
15
16
17
18
19
20
21
22
23
24
25
26

Thinking of You
Where Are You?
Will Call Later
Alert
Button
Request Button
Black Button
Blue Button
Green Button
Orange Button
Red Button
White Button
Yellow Button

9 Device Configuration Bit 0 (0x0001) – Alarm on Requested
Bit 1 (0x0002) – Alarm on Standby
Bit 8 (0x0100) – Call me on Requested
Bit 9 (0x0200) – Call me on Standby

10 Alive Update Timer Values from 0 (0x00) to 59 (0x3B) represent 0 to 59 seconds
Values from 64 (0x40) to 123 (0x7B) represent 0 to 59 minutes
Values from 128 (0x80) to 151 (0x97) represent 0 to 23 hours
Values from 160 (0xA0) to 255 (0xFF) represent 0 to 95 days

11 Update Flags 0x0000 – Not used by this device

12 Undefined 0x00

13 Device Parameter 0xFF – Not used by this device

14 Undefined 0x00000000

15 Pending Update Timer 0x00 – Not used by thus device

16 MAC Address 0x000D6F**********

17 Device Name Text name chosen from index list in field 8 above.
An upper or lower case letter may be appended to this name.

Leave a Reply Cancel reply