Open/Closed Sensor for the Home Heartbeat
The following table identifies the values that are valid for each field of the state record. For a complete description of these values and their use, please see the State Table of The Eaton Home Heartbeat document.
Field | Name | Data | ||||
---|---|---|---|---|---|---|
1 | State Record ID | A value from 2 (0x02 ) to 33 (0x21 ) is assigned to this device |
||||
2 | ZigBee Binding ID | A value from 0 (0x00 ) to 31 (0x1F ) is assigned to this device |
||||
3 | Device Capabilities | Bit 2 (0x04 ) – Is a sensorBit 5 ( 0x20 ) – Is a sensor |
||||
4 | Device Type | 3 (0x0003 ) – Open/Closed |
||||
5 | Device State | Bit 0 (0x01 ) – ClosedBit 1 ( 0x02 ) – Open |
||||
6 | Device State Timer | Values from 0 (0x00 ) to 59 (0x3B ) represent 0 to 59 secondsValues from 64 ( 0x40 ) to 123 (0x7B ) represent 0 to 59 minutesValues from 128 ( 0x80 ) to 151 (0x97 ) represent 0 to 23 hoursValues from 160 ( 0xA0 ) to 255 (0xFF ) represent 0 to 95 days |
||||
7 | Device Alerts | Bit 0 (0x01 ) – Alarm triggered; controlled by Field 9: Device ConfigurationBit 1 ( 0x02 ) – Device off-line, out of range, or battery deadBit 2 ( 0x04 ) – Low Battery signal sent during “I’m Alive” message from device |
||||
8 | Device Name Index |
|
||||
9 | Device Configuration | Bit 0 (0x0001 ) – Alarm on ClosedBit 1 ( 0x0002 ) – Alarm on OpenedBit 8 ( 0x0100 ) – Call me on ClosedBit 9 ( 0x0200 ) – Call me on Opened |
||||
10 | Alive Update Timer | Values from 0 (0x00 ) to 59 (0x3B ) represent 0 to 59 secondsValues from 64 ( 0x40 ) to 123 (0x7B ) represent 0 to 59 minutesValues from 128 ( 0x80 ) to 151 (0x97 ) represent 0 to 23 hoursValues from 160 ( 0xA0 ) to 255 (0xFF ) represent 0 to 95 days |
||||
11 | Update Flags | 0x0000 – Not used by this device
|
||||
12 | Undefined | 0x00 |
||||
13 | Device Parameter |
0xFF – Not used by this device |
||||
14 | Undefined | 0x00000000 |
||||
15 | Pending Update Timer | 0x00 – Not used by this device |
||||
16 | MAC Address | 0x000D6F********** |
||||
17 | Device Name | Text name chosen from index list in field 8 above. An upper or lower case letter may be appended to this name. |